MOTUL 7100 4T 15W-50 Synthetic - Ester oil
High Performance Motorcycle Lubricant 100% Synthetic - Ester
TYPE OF USE:
High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe...
Recommended for specific DUCATI, KTM, BMW engines requiring SAE 15W-50 viscosity grade oil. Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…
PERFORMANCE:
STANDARDS - API SN / SM / SL / SJ / SH / SG
SPECIFICATIONS - JASO MA2 under N° M033MOT164
Protection:
Ester Technology:
- Low traction coefficient Ester to minimize engine internal friction losses and improve performance
- Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time.
100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs.
Optimized Phosphorus and Sulfur content (JASO MA2 1200 ppm) for better operating conditions of catalytic converters.
The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result).
Comfort:
JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1 and MA2.
JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three riding modes: Starting, Acceleration and Constant Speed.
RECOMMENDATIONS:
Drain interval: according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES:
Color - Visual Red
Viscosity grade - SAE J 300 15W-50
Density at 20°C (68°F) ASTM D1298 - (0.864)
Viscosity at 40°C (104°F) ASTM D445 - (126.5 mm²/s)
Viscosity at 100°C (212°F) ASTM D445 - (18.0 mm²/s)
Viscosity Index ASTM D2270 - (158)
Pour point ASTM D97 - (-30°C / -22°F)
Flash point ASTM D92 - (236°C / 457°F)
TBN ASTM D2896 - (8.4 mg KOH/g)
Packaging 1L can
Motul 7100 4T 15W50 е 100% синтетично високопроизводително масло за четиритактови двигатели с естерна технология. Надвишава изискванията на мотоциклетни производители като Ducati, Aprilia, KTM и BMW, които препоръчват вискозитет 15W50 за определени модели.
Вискозитетът 15W50 се препоръчва за големи двигатели с течно охлаждане.
Минимизира вредните емисии. Притежава антикорозионни и противопенни свойства. Устойчивост и нисък разход при големи температури и при двигатели с по-големи допуски. Препоръчва се от Harley Davidson.
Отлична стабилност на масления филм за надеждна защита на двигателя и трансмисията, позволява лека смяна на предавките. Перфектна съвместимост с мокри съединители. Стандарти: API SN/SM/SL/SJ/SH/SH/SG Одобрения: JASO MA2
Опаковка 1L
|